Kings Camo Optics Accessories: Match the Cover to the Exposed Area

OUR PICKS

These accessories do not perform the same job. Bino Bandit addresses light around binocular eyecups. Scope Slicker covers a scope. Spot Slicker wraps a spotting scope with a different retaining system. Choose the exposed area first; a universal “best optics cover” ranking would conceal the compatibility question.

Problem	Start here	Verify
Light enters beside your eyes	Bino Bandit	Eyecup interface
Scope lens ends need covering	Scope Slicker NX2	Complete length and offered size
Spotting-scope cover must wrap the body	Spot Slicker NX2	Girth, angle and middle strap

Owner support is small: two Bandit comments, three Scope Slicker comments and four Spot Slicker comments. Several are arrival impressions. The middle-strap guide turns the most specific fit complaint into a useful pre-purchase check without pretending these products share a standardized protection test.

Side-light shield

Alpine Innovations Bino Bandit

Read the full review ↗

Check price

Construction & features

Neoprene eyecup-area accessory
Foldable sides
Water-resistant material claim
Exact binocular compatibility unverified

Best if

Your nuisance is intrusive side light, as in the two accounts.

Skip if

You need an enclosing weather or transport case.

Both owners describe helpful light shielding. That supports the eyecup-area task, not objective-lens coverage or medical eye-strain claims. Official description and owner comments.

Dimensions (L × W × H)	Not verified
Compatible exact models	Not verified
Covered equipment area	Eyecup-area side-light shielding
Material	Neoprene

Scope lens ends

Alpine Innovations Scope Slicker NX2

Read the full review ↗

Check price

Construction & features

2 mm neoprene and rigid lens inserts
Dual-band retention
Integrated lens cloth
Two sizes described; exact offer must be checked

Best if

You can confirm the complete covered length and want the protection Jack describes.

Skip if

A vague family name is your only compatibility evidence.

The selected Medium offer is 12–17 inches. Jack’s weather account and Rich’s Viper fit do not identify their purchased size, so confirm compatibility separately. Official description and owner comments.

Dimensions (L × W × H)	Selected Medium offer: 12–17 in length. Family description: 12–20 in, up to 75 mm objective; do not transfer full range to Medium
Compatible exact models	Not verified
Covered equipment area	Scope lens protection; flip-up access
Material	2 mm neoprene with rigid lens inserts

Spotter wrap

Alpine Innovations Spot Slicker NX2

Read the full review ↗

Check price

Construction & features

2 mm neoprene
Triple-band retention
Rigid lens inserts and integrated cloth
Flip-up lens access described by an owner

Best if

You can verify body dimensions and want accessible lens ends like Timothy describes.

Skip if

Only length matches or the middle band must be forced closed.

The selected Small offer is 10–14 inches and 50–70 mm objective. The 85 mm owner accounts explain girth problems in the product family, not compatibility with this size. Official description and owner comments.

Dimensions (L × W × H)	Selected Small offer: 10–14 in length, 50–70 mm objective. Body girth and angle still require confirmation
Compatible exact models	Not verified
Covered equipment area	Spotting-scope body and lens ends; flip-up access
Material	2 mm neoprene with rigid lens inserts

Product Comparison

Feature	Alpine Innovations Bino Bandit Review: Side-Light Control From a Small Owner Sample	Alpine Innovations Scope Slicker NX2 Review: Neoprene Lens Coverage With Length to Check	Alpine Innovations Spot Slicker NX2 Review: Body Girth Matters as Much as Length
Product Image
Category	Hunting Accessories	Hunting Accessories	Hunting Accessories
Model	Alpine Innovations Bino Bandit	Alpine Innovations Scope Slicker NX2	Alpine Innovations Spot Slicker NX2
Edition	KNG-BIBCU10-XK7; historical owner editions not verified	KNG-NX2SCCU10-XK7; historical owner editions not verified	KNG-SPNX2CU10-XK7; historical owner editions not verified
Intended fit / audience	Binocular users; eyecup compatibility requires confirmation	Scope cover; exact instrument and offered size require confirmation	Spotting-scope cover; confirm body girth, length and angle
Item weight	Not verified	Under 2.5 oz	Not verified
Item weight basis	Not verified	Manufacturer claim; size basis not specified	Not verified
Dimensions (L × W × H)	Not verified	Selected Medium offer: 12–17 in length. Family description: 12–20 in, up to 75 mm objective; do not transfer full range to Medium	Selected Small offer: 10–14 in length, 50–70 mm objective. Body girth and angle still require confirmation
Compatible exact models	Not verified	Not verified	Not verified
Attachment interface	Fits around eyecups; foldable sides	Dual retaining bands	Triple-band system
Covered equipment area	Eyecup-area side-light shielding	Scope lens protection; flip-up access	Spotting-scope body and lens ends; flip-up access
Included components	Not verified	Integrated lens cloth	Integrated finger-pocket lens cloth
Pack quantity	Not verified	Not verified	Not verified
Material	Neoprene	2 mm neoprene with rigid lens inserts	2 mm neoprene with rigid lens inserts
Waterproof construction claim	Not verified: water-resistant material claim only	Manufacturer all-weather claim; no standardized ingress test captured	Manufacturer weatherproof claim; no standardized ingress test captured
Buy Now	Check price	Check price	Check price

Choose for your needs

Match the object and the uncovered area

Binocular eyecups

Bandit is the relevant light shield.

Scope

Scope Slicker requires its own complete-length fit check.

Spotting scope

Spot Slicker requires body-girth and retention checks as well as length.

Frequently Asked Questions

Are these interchangeable covers?

No. Their documented coverage areas and attachment systems differ. Select by the exact instrument and task.